Jiashan Bangsheng Bearing Co., Ltd.
Add:No. 38, Jinjia Avenue, Jiashan County, Zhejiang Province
Tel:86-573-84252262
Fax:86-573-84252262
Mob:15067330806 13957343967
Url:www.jsbszc.com
Product
Fb092 bronze cloth hole bearing
Description
Basic characteristics: The bronze cloth hole bearing is based on cusn6.5p0.1 or cusn8p0.3 bronze, and a uniform and orderly oil injection hole is designed. Grease after assembly. The bearing has the advantages of large oil storage, convenient installation and small design machine, and can replace the copper sleeve, greatly reducing the cost.
TECHNICAL DATE
Maximum load
Static load
120N/mm2
hardness
HB 90-120
Dynamic load
40N/mm2
Elongation rate
40%
Maximum speed
2m/s
Service temperature
-100℃~+200℃
Max PV
2.8N/mm2.m/s
friction coefficient
0.08~0.25
tensile strength
450N/mm2
Thermal conductivity
60W(m.K)-1
Yield strength
250N/mm2
Coefficient of linear expansion
15x10-6K
应APPLICATION CHARACTER
1. The inner hole of the product is full of rhombic oil holes and oil pits, which can store a large amount of grease in use and prolong the interval of oil filling; 2. Less oil lubrication, suitable for the occasion of difficult oiling or water lubrication; 3. Good wear resistance, small friction coefficient and long service life; 4. It can be used in the range of - 100 ℃ - 200 ℃; 5. Good running in performance, low noise, no pollution; 6. Thin wall structure, light weight, can reduce mechanical volume; 7. The matrix has high density, no shrinkage cavity and large bearing capacity; At present, it has been widely used in the sliding parts of various machines, such as: automatic mechanical equipment (stretching, swinging, sliding, bending, turning, turning parts) hydraulic cylinder guide sleeve, textile machinery, plastic molding machine, die-casting machine, rubber machinery, hydraulic transport vehicle, automobile, motorcycle industry, port, water conservancy, engineering, agricultural machinery, etc.